79 lines
2.6 KiB
Markdown
79 lines
2.6 KiB
Markdown
# OpenVPN-installer
|
|
|
|
OpenVPN installer for Raspberry Pi.
|
|
|
|
This script will let you setup your own secure VPN server.
|
|
|
|
Users with DS-Lite it's recommanded to first read the chapter [DS-Lite](/DS-Lite).
|
|
|
|
## Usage
|
|
|
|
First, make sure IPv6 is enabled
|
|
|
|
```bash
|
|
modprobe ipv6
|
|
```
|
|
|
|
Secondly, get the script and make it executable :
|
|
|
|
```bash
|
|
https://raw.githubusercontent.com/lordnik22/OpenVPN-Installer/master/openvpn-install.sh
|
|
chmod +x openvpn-install.sh
|
|
```
|
|
|
|
Thirdly, run it :
|
|
|
|
`./openvpn-install.sh`
|
|
|
|
The first time you run it, you'll have to follow the assistant and answer a few questions to setup your VPN server.
|
|
|
|
An example how to answer is provided in [Example](example.txt).
|
|
|
|
When OpenVPN is installed, you can run the script again, and you will get the choice to :
|
|
- Add a client
|
|
- Remove a client
|
|
- Uninstall OpenVPN
|
|
|
|
## DS-Lite
|
|
|
|
### Universale Port Mapper
|
|
I use a Universale Port-Mapper at feste-ip.net. This makes it possible
|
|
to access my home-network while I am connect from a IPv4-Network (e.g.
|
|
most mobilphone-networks are in IPv4). They only support TCP (never
|
|
tested with UDP).
|
|
|
|
If you use such a port-mapper you need to provide the DNS or IP of
|
|
that port-mapper instead of your device-ip.
|
|
|
|
I had to adjust the port in the client-file to the port they assigned to me.
|
|
|
|
For the IPv6 Target Port I could use the default OpenVPN port: 1194.
|
|
|
|
For the hostname I used my DDNS from no-ip.
|
|
|
|
### DDNS
|
|
|
|
I use a DDNS from no-ip.net. This makes it possible to access your
|
|
home-network even if your ISP changes the IPv6 (untested). In theory
|
|
the IPv6 should never change but I still use it because I already used
|
|
it with my old ISP with IPv4.
|
|
|
|
## The fork of the fork of the fork
|
|
|
|
This script is based on the great work of [Nyr and its contributors](https://github.com/Nyr/openvpn-install), [Angristan and its contributors](https://github.com/Angristan/OpenVPN-install) and [WMtech-1 and its contributors](https://github.com/wmtech-1/OpenVPN-Installer).
|
|
|
|
While I was at my old ISP with IPv4 I used the script from Nyr. Now I
|
|
am at a new ISP which uses DS-Lite. I therefore wanted to setup a
|
|
OpenVPN that is accessible over IPv6. I searched for similar projects
|
|
and found the script from WMtech-1 and adjusted it to my need until it
|
|
worked.
|
|
|
|
## Forward to VMtech-1 for more details
|
|
|
|
See [WMtech-1 and its contributors](https://github.com/wmtech-1/OpenVPN-Installer).
|
|
|
|
## Credits & Licence
|
|
|
|
Thanks to VMtech-1, the respective [contributors](https://github.com/wmtech-1/OpenVPN-Installer/graphs/contributors), Angristan and of course Nyr's orginal work.
|
|
|
|
[MIT Licence](https://raw.githubusercontent.com/wmtech-1/OpenVPN-Installer/master/LICENSE)
|